A Guide For A Do-It-Yourself Water Damage Restoration

A water damage restoration can be a do-it-yourself project for you and your family especially if there has been minimal damage. Just know the important areas of this task and keep in mind a few safety tips.

There are four key areas in a water damage restoration and the first one is water removal. If there is a substantial amount of accumulation water, you may want to make sure that electrical shocks accidents do not happen by turning off your home’s main electrical supply control switch. If you are not trained to handle electrical systems, have a professional electrician check it out first. And if you choose to use electrically powered water removal tools, use a generator or make sure it is safe to use your home’s electrical power supply.

If there has been structural damage in your home, then the next step to a water damage restoration will be structural repairs. It is important that this is done before the cleanup so no accidents such as falling debris or structures happen.

Cleanup or disinfecting is also one of the four key areas of water damage restoration. If water damage is caused by flood, then you naturally have to take care of bacterial growth. In this area, you will have to wear the proper cleanup attire to avoid bacterial contact and ingestion. Then a disinfecting or cleaning agent will be needed along with a few cleanup tools. Start by scrubbing clean walls and floors. You may use a sprayer fitted with a disinfecting solution to make the job a lot easier. Then, make sure to wash and disinfect every furniture/fixture that came in contact with flood or dirty water. If you have delicate water damaged carpet or furniture, you may just send them to professional cleaners so you have a greater chance of saving them.

The last and most important step in water damage restoration is drying. Every surface that came in contact with accumulated water must be successfully dried to avoid mold growth. Mold is a type of fungi that can grow in wet or damp surfaces. While many will not be affected with mold growth, some may experience skin allergies and respiratory problems such as coughing or asthma attacks. Symptoms can even be fatal for individuals already diagnosed with respiratory diseases.

A water damage restoration can be a do-it-yourself task for you and your family. Just make sure you cover all the four key areas and follow safety precautions to avoid accidents.

Richard Barthallo shares How-To tips and other information for Flood Damage Cleanup and Water Damage

2 Solar Water Heater DIY Projects

There are two types of solar water heaters. Passive and forced circulation. In this article I’ll show you how to construct one of each. Two simple yet effective solar water heater DIY projects.

I must first say that neither of these heaters will heat your home. You could use similar methods to preheat your water before it flows to your hot water heater. If you live in a freezing climate you should look into a forced circulation system. Both of these heaters are for experimentation. You could use them camping or for small water heating needs around the house.

* The first one is extremely simple. Just a black storage tank exposed to the sun will heat water. If you have ever seen one of those camping shower bags you know what I’m talking about. I’ve seen some folks heating water in those big blue food grade 55 gallon drums. Just spray paint it flat black. Install a PVC valve. Set it in a nice sunny spot. Fill it with water. Sit Back and watch mother nature work her magic.

* The second takes a little more work. You will need a length of 1/2″ or 3/4″ Black hose. I would recommend 100 feet in length. The longer the better.

Do this on a large flat area of ground. Unroll the entire hose in a straight line. Starting with the inlet side begin to roll the hose into a flat coil. To make it easier to transport you can tape or zip tie it together as you go. Once you have rolled the entire hose flat your outlet should be on the outside. Your inlet on the inside.

Take your flat rolled hose and place it in full sunlight. Connect the inlet to your water tap or elevated tank. Crack your valve so that the water runs slowly. The water coming out of your coil should be much hotter than the water coming in.

You could couple these heaters together for even better results. Elevate your black tank in an area with full sun. Connect your coil to the tank. Make sure the coil is below the tank, but still in full sunlight. Now you have your first solar water heating system. Perfect for camping or small water heating needs.

You can construct a much more sophisticated system that will supply your home with hot water. This is just a starting point. An experiment to show you some of what solar water heater diy projects can do.

Good luck. Have fun experimenting.

Who Else Wants To Create Their Own Electricity And Laugh At Rising Energy Prices While Saving The Environment And Having The Electricity Company Pay You?”
http://www.save-money-on-electric-bill.com/

Clean Water by use Our Pool Filters ? Pool Supply, Pool Supplies

Today so many people in the world are using water. But no one think to save water. This is our tragedy. World is thirsty of drinking water. Millions of people use water in order to drink, bathe, and cook, using water from public water systems. The basic idea is to pump water in a continual cycle, from the pool through the filtering and chemical treatment systems and back to the pool again. In this way, the pumping system keeps the water in the pool relatively free of dirt, debris and bacteria. Some pools also include heaters in the mix, in order to keep the water at a certain temperature. We want to avoid chemicals water in swimming pool. So save water and energy by use our Swimming Pool Supplies & Accessories. On a hot summer day, a swimming pool can seem like the greatest invention known to man. And as it turns out, there really is a lot of cool technology at work in your average pool. Swimming pools come in all shapes and sizes, but nearly all of them, from the backyard personal pool to the water park wave pool, work in the same basic way.

They use a combination of filtration and chemical treatment to continually clean a large volume of water. Some Swimming pools are made from fiberglass unbreakable plastic, which has been molded into a basin shape. Swimming Pool Supplies, a construction crew digs an appropriately sized hole, lays the necessary plumbing, adds some sand filler and lowers the preformed pool structure into the hole. Then they level the pool; hook up all the plumbing and backfill in the area around the pool. Swimming Pool Supply costs depending on the size of pool you want installed, the material used, the complexity of design, the area you live in, and whether or not it is an aboveground pool or an in ground swimming pool.

The following cost estimates are only that, estimates, so make sure you talk to contractors in your area for more information. Also, local friends and relatives who have had a pool installed may be good resources, both for getting accurate cost estimates and for finding a good contractor. Swimming pools offer the greatest variety in swimming pool design basically, whereas aboveground swimming pools are the most especially.

For more information visit http://www.poolsupply.net/

Our Company has Pool Supply. We can offer in ground pool cleaners. Any type of pool supplies. Our Pool Supplies is time to uncover the pool and get it ready for summer enjoyment.

Water Features Attract More Birds to Your Yard

Water is an extremely important element for birds.  Like all other living things they need to drink water to survive.  Also, in order to stay alive, the birds need to keep their feathers clean so they make daily visits to safe, clean and consistent water sources for the important task of preening.  Many birds come to water that do not come to seed feeders or other bird attracting devices.  The addition of a bird bath or water feature will attract more birds to your backyard.

To provide water for your birds, all you really need is a shallow 1 to 2 inch deep dish with a non-slippery bottom.  Well designed commercial bird baths are specifically made for this purpose and are available in a wide variety of price ranges.  A slightly more elaborate method for providing water for wild birds is a small backyard bird pond.  These are also available in a variety of price ranges.

While bird baths and small ponds are simple ways to attract birds with water, one thing is very clear, birds love movingwater.  Many more birds will be attracted by a drip or waterfall situation.  The sound of moving water will attract every bird within hearing.  Moving water gets the birds’ attention and in nature moving water is more natural and healthier than stagnant standing water.

The addition of a dripper to a simple  bird bath or pond can be one of the most effective means of attracting birds to your yard.  Drippers do what their name implies and simply drip water into the bird bath giving the sound of moving water.  When used in a bird bath or simple pond, drippers create appealing ripples in the the water surface which can be seen by the birds from a long distance away.  Many times birds will perch on the tube of the dripper to inspect the bird bath or pond and drink the fresh water as it drips out of the tube.  Drippers come in two basic forms, recycling (recycles the water already in the bird bath or pond) or non-recycling (These are hooked up to an outside water sources such as a hose bib.).  If you use the recycling dripper you must make sure that the water level is maintained in the bird bath because if it does evaporate down you may burn out the motor in the dripper.  These drippers are best used in mild weather conditions, shady or protected areas where evaporation is not a serious problem.  Non-recycling drippers are the bet bet when hot weather or wind is a factor in evaporation.  The dripper will help to maintain the water level in your bird bath because it is constantly dripping water into it.  Most commercial drippers can be set to give a certain number of drips per minute.  When adjusted down to one drop per second these drippers supply approximately one pint of water per hour or about three gallons every 24 hours.  Drippers, in addition to giving the sound of moving water, also add fresh water to the water feature to replace water lost by bathing or evaporation.  This water replacement function insures that clean water is constantly being added to freshen the bath water.

If landscaping is in your blood then a backyard bird pond may provide you with the opportunity to utilize your landscaping skills and attract the wild birds to your backyard.  Many of these ponds come in easy to set up kits and many of these kits include waterfalls or various tiers which flow into one another.  All of this, again, provides for the sound of moving water effect .  These waterfall kits often come with pumps to recycle the water over the falls to produce the desired effect.  They can even be utilized with a dripper to continuously add fresh water to the set up.

Water can also be provided in the back yard in the form of a mister.  These set ups simply let off a short burst of mist at set intervals.  I have seen these set up on low tree or shrub branches or on the ground in or near a bird bath or pond.  My favorite location in our yard is under a Salvia plant near our backyard bird pond.  The mist makes the lower leaves of the Salvia wet and the birds love it.  Hummingbirds love flying through the mist and many small birds including hummingbirds, gnatcatcher, warblers, vireos and Verdins love to bathe by rubbing up against the wet foliage.  This activity often precedes a visit to the bird pond to drink.

Any combination of the above will attract birds to your yard.  You can make your water feature more comfortable for the birds by providing nearby bushes and trees for preening and evading predators.  Give the birds perches so that they can safely look for cats or other predators before coming in to bathe.  We recommend you place your water feature 5-6 feet away from a shrub or brush pile.  This distance keeps most cats from being able to pounce directly onto bathing birds.  The shrub or brush pile is also close enough for the birds to fly into if the attack comes from a hawk diving for them.  Remember to keep the shrubs trimmed so that no branches hang directly over your water feature.

When you provide water for wild birds cleanliness is very important.  A number of diseases can be spread from dirty water in a bird bath.  To prevent these diseases your bird bath should be cleaned every few days with a 10% bleach solution.  When nighttime temperatures fall below 55 degrees, the bleach is not necessary but the cleaning is still a must.  A simple rule of thumb regarding cleanliness is to ask yourself, “Would I drink from this bird bath if I were a bird?”

Always remember to keep fresh water in your water feature.  A bird bath with no water will attract no birds.

Water will attract both the birds that will come to feeders and birds which do not eat seeds, so, by providing a water feature in your yard you will have many new birds visiting you.  In addition to providing life giving water to the birds, water provides easy viewing of many hard to see species such as the tree top dwelling warblers, tanagers and vireos, as well as the shy birds such as the thrushes.

Always remember the three basic elements of providing water for birds and wildlife – cleanliness, comfort and consistency.  All three are important in maintaining a backyard bird or wildlife habitat.

After 35 years as a professional ornithologist and bird bander Thomas Hays now assists others in developing bird and wildlife friendly habitats in their own back yards. Visit me at http://tomsbirdfeeders.com/ to see how I can help you formulate a backyard habitat for the birds in your area. Visit our website for more helpful hints on attracting birds and wildlife to your property.